 |
 |
 |
|
Yet again, your wildest dreams have come true! We’ve decided to offer the
little brother of the ultimate box-shaped LED par fixture that’s loaded with
7x 15w RGBAW 5-in-1 LED’s, a built-in AnyFi™ wireless DMX receiver, and an
internal Lithium-Ion battery system, all while maintaining the same features
that made the original HotBox™ and RokBox™ series fixtures so popular!
The SkyBox™ 5 features 5/6/7 and 10-channel control modes which means it
works great with any type of controller, especially our very own Kontrol 5™
Skywire DMX controller with built-in wireless transmitter! Plus, the built-in
4 character/4 button LCD control panel allows total control over the fixture,
including master/slave, auto mode, fade, strobe settings, manual color
adjustment, sound active mode, wireless settings, IR remote control mode,
and power output mode settings.
There’s handy new features built into the SkyBox™ 5’s Lithium-Ion internal
battery system which allows the user to select one of 3 power output mode
settings. Depending on the needs of any given application, you can select
either High Power, Medium Power, or Battery Saver Mode, which allows
the fixture to run for a longer time at lower output. With average usage of
color fades in High Output Mode, you can expect the battery life to last up
to 10+ hours, color jumping 5+ hrs, or full on for 3+ hrs! Need more time?
Just switch over to one of the other battery power saver modes! The normal
battery recharge time is 4 hrs, and can be done even while in use!
The fixture also features built-in PowerCon™ compatible AC power In/Out
connectors, 3-pin DMX in/out connections, a main power switch, and an LED
illuminated battery power gauge which illuminates red during charge, and
green when fully charged. These are all strategically placed on the back of
the unit in a way that allows you to use it in ANY position, including flat on
the floor!
Then for the ultimate in ease of setup, this fixture has a built-in AnyFi™ 2.4
GHz wireless DMX receiver, which can flawlessly receive either Skywire™ or
W-DMX™ wireless DMX signals.
- Optical
- Light source: 7x 15-watt, 5-in-1 RGBAW LEDs
- Beam Angle: 25°, 29° field
- Luminous Intensity: 11,300 Lux @ 1m, 3,250 @ 2m
- Wireless Receiver
- Frequency hopping W-DMX™
- Protocol
- Skywire™ 2.4Ghz ISM (2.402-2.48Ghz), 512 channels, 6/7 frequency groups
- Less Than 5ms Latency
- Receiver sensitivity: -94dBm
- Weight & Dimensions
- Length: 9.02 inches (229 mm)
- Width: 6.5 inches (165 mm)
- Height: 9 inches (228 cm)
- Weight: 9.9 lbs (4.5 kg)
- Control
- Protocol: USITT DMX-512
- DMX Channels: 5/6/7/10 (User Selectable)
- Input: 3-pin XLR Male
- Output: 3-pin XLR Female
- Operating Modes: Standalone, Master/Slave, Sound Active, Color Preset
- Power & Current
- Operating Voltage: 90-230VAC, 50-60 Hertz
- Power Consumption: 84W, 13A
- Warranty
- 2-year limited warranty, does not cover malfunction caused by damage to LEDs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 7x 15W RGBAW 5-in-1 LEDs
- Built-in AnyFi™ wireless DMX receiver (Skywire™ or W-DMX™)
- Intelion™ lithium-ion battery system
- 3 battery power modes
- IR remote control (sold separately)
- 5 user-selectable 32-bit dimming curves
- Variable electronic dimming & strobe
- Built-in color & chase macros via DMX
- Built-in automated programs via master/slave
- Built-in sound active programs
- RGBAW color mixing ability in standalone mode
- Rugged and well-built
- Super-quiet variable-speed internal fan cooling
- Dual mounting brackets for positioning flexibility
- Flicker-free constant-current 400hz LED driver
- 3-pin male input and 3-pin female output
- powerCON® compatible
|
|
|
|
|
|
|