 |
 |
 |
|
The Laser Blade G is a powerful, compact moving head fixture with lightning fast 540° pan & 270° tilt, and equipped with a 50mW, CLASS 3R wide beam laser with 15KPPS galvo scanners for smooth shapes, animations, and more for jaw dropping effects!
It's very bright, and packed with a ton of goodies like 133 geometric figures, 14 animations, 76 types of beam patterns, and even 2-in-1 frame projection in DMX mode where any two separate shapes or patterns can be individually positioned, rotated, zoomed, and more!
It can be operated in standalone mode, auto-beam, auto-animation, sound active mode, or via DMX where you take full control of pan/tilt, zoom in/out, rotating, drawing, billowing, speed, and animation selection. Want to really throw things over the edge at your next show? Set up two or more Laser Blade™ G fixtures in master slave mode with reversed pan and tilt, add some fog, and get ready to witness some serious mirrored fat beam "Liquid Sky" effects!
This fixture also features a super easy-to-use 4-button LCD control panel, IEC power input connection, 3-pin DMX in/out connections, mounting bracket, and weighs in at less than 7 lbs.
It’s a great effect for venues large or small, and perfect for DJs, bands, clubs, and bars looking for the next new and cool piece to add to their light show!
- Operating Voltage: AC 110-250VAC, 50-60Hz
- Power Consumption: 20w
- Fuse: 2A/250V
- Fat beam 50mW 532nm green DPSS
- Laser class: Class 3R
- Max. Operating Temp.: 104 degrees F (40 degrees C) ambient
- Protocol: USITT DMX-512
- 4-button menu with LCD display
- DMX Channels: 18
- Input: 3-pin XLR Male
- Output: 3-pin XLR Female
- Operating Modes: Standalone, Sound Active, Auto-Beam, Auto-Animation, DMX512, Master/Slave
- Length: 7.1 inches (180 mm)
- Width: 5.5 inches (140 mm)
- Height: 10.6 inches (270 mm)
- Weight: 6.7 lbs (3 kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 50mW, CLASS 3R fat beam laser + 15KPPS galvo scanners
- Pre-programmed with 133 geometric figures, 14 animations, & 76 beam patterns
- Pan: 540º/ Tilt: 270º
- Easy-to-use 4-button LCD control panel menu
- Built-in auto-beam, auto-animation and sound-activate programs
- In DMX mode, 2 animations in one frame can be operated separately
- Perfect for venues, large and small
- Ready to use right out of the box
- 3-pin male input and 3-pin female output
- IEC power input connector
|
|
|
|
|
|
|